ModuleUA specializes in the production of galvanized steel in coils with a thickness of 0,3 mm – 1,0 mm.
After reconstruction the project production capacity of the facility is 200 000 tons of galvanized steel in coils per year, which is produced in a cold rolling shop using the hot-dip galvanizing method of cold-rolled rolled products on a continuous hot-dip galvanizing line.
Product
description:
Roll thin galvanized steel:
- Code of the DCP based on the State Classifier of Products of Services DK016-97:
- 27.10.40. 840 – type “Thin sheet with a coating obtained by the hot-dip galvanizing method, made of non-alloy steel, width at least 500 mm”
- 27.10.40 – subcategory “Flat rental”
- The product meets the requirements of the interstate standard GOST14918-80 “Galvanized sheet steel from continuous lines”.
Main
characteristics:
According to the technical offer of Delta Brands Inc. (DBI) and the project “Cold rolling mill with pickling area and a continuous hot-dip galvanizing line” of NIiPIMP “Diprostal” UkrDNTC “Energostal” a thin-sheet galvanized steel has the following characteristics:
| Thickness, mm | Width, mm | Production volume, tons per year | |
|---|---|---|---|
| Actual production | 0,3; 0,36; 0,4; 0,45; 0,5; 0,65; 0,70; | 950; 1000; 1250 | 200 000 t/year |
Actual production
Thickness, mm
0,3; 0,36; 0,4; 0,45; 0,5; 0,65; 0,70;
Width, mm
950; 1000; 1250
Production volume, tons per year
200 000 t/year
Galvanized steel meets the requirements of ГОСТ14918-80 for:
- Target group: for cold profiling
- Depending on the thickness variations of the zinc coating: normal thickness variations
- By crystallization spangle: without crystallization spangle
- Dimensions, limit deviations and other requirements for the rolled products according to ГОСТ19904-90
- The maximum permissible net weight of a coil – 10 tons
- Protection of the zinc coating surface from corrosion during transportation and storage by means of passivation – chromating, oiling