ModuleUA produces prepainted cold rolled galvanized steel using the “Coil-coating” technology on the line “FATA”, Italy.
The “Fata” (Italy) line for painting of galvanized steel in coils was commissioned in 1998.
In 2002 the reconstruction and launch of the line was done with the involvement of specialists from “Siemens” (Germany) and “Stein Heurtey” (France).
“Fata” line is equipped with “Redex” (France) stretching machine, which allows the elimination of the “crescent” and “non-flatness” of the ready product.
The production of prepainted cold rolled galvanized steel in coils is performed under a continuous supervision of representatives of the above listed companies.
Colors according to RAL-Classic (RAL-C)
It is possible to supply PPGI with width from 1000 mm up to 1250 mm at the customer demand.
The product complies with ДСТУ Б.В.2.7-58-97, СНиП III-18-75, has a certificate of conformity of Ukraine No. UA 1.070.0183776-07 dated 21.12.2007.
- Producer ModuleUA LLC, production according to EN 10169
- Coil thickness 0,33-1,0 mm with basic width 1000, 1250. Internal coils diameter – 610 mm
- Extra charge for cutting into sheets/strips excluding waste, on the condition of purchase according to the specification/invoice of more than 3 tons: 300 UAH/mt (with VAT) and 10 USD/mt (without VAT)
- Coating type: flat polyester – PE, wrinkle polyester – PEWR. Extra charges for wrinkle coating are 1160 UAH/mt (with VAT) and 30 USD/mt (without VAT). These extra charges do not apply to Grade B products.
- The thickness of the flat polyester paint coating is 20 microns, 35 microns paint thickness is applied for an additional fee.
- The zinc content for flat and wrinkle polyester is 100 g/m2 (extra charge for zinc content of 140 g/m2 and more upon request).
- Packaging with a cardboard sleeve
Commercial
terms:
The production period takes up to 30 calendar days
from the date of placing an order